Connection Guides

Since the mid- to late s, home theater systems have rapidly grown in popularity, as consumers have looked for ways to enjoy movies at home the same way they do in traditional movie theaters. With the advent of the DVD player, having true at-home theater-quality sound production has now become a reality. This technical article will help explain what home theater is and how it can be set up. So what exactly is home theater? A home theater system enables you to reproduce the sound and video quality of a commercial movie theater in your own living room. Prices for home theater systems can be as low as a few hundred dollars or up into the tens of thousands of dollars. Fortunately, creating a home theater of your own requires only a few components.

Can you hook up a sub to a 2 channel stereo system?

At this point, buying preamps and discrete seperate audio components may well be getting you in too deep. There’s a lot of knowledge you need to have before you try to do anything in that route. Especially since you’re talking about 4-ohm speakers.

is there any way to connect my sonos connect-amp to a receiver to send music, etc. thru the receiver’s speakers. i only see RCA plug inputs & a bass output. i presently am using my sonos amp to power outdoor speakers.

The replacement is the AVR-E Plug your portable audio player into the receiver’s stereo mini jack, and the built-in Compressed Audio Restorer will convert your compressed music files into rich sound. Discrete circuitry delivers powerful surround sound for 3D movies, while a GUI overlay lets you easily change system settings through menus on your TV screen. This allows the receiver to reproduce original sound more faithfully than conventional models, which use integrated circuits.

Play Compressed Files Files with Rich Sound Quality Thanks to Denon’s Compressed Audio Restorer, you can connect your portable audio player to the stereo mini jack on the AVR ‘s front panel and enjoy music from your player in beautiful, rich sound quality. This technology restores compressed music sources to their original, pre-compressed quality to give you a lively sonic ambience with greater detail and depth.

By connecting a 3D Blu-ray disc player and a 3D TV to the receiver, you can have a 3D home theater system with exceptional high-definition sound and video. Experience high-quality audio and video with the AVR receiver. Four HDMI inputs for added connectivity. Minimum Signal Path for Clear Audio and Video This receiver features a simple and straight design concept implemented in the signal paths to contribute to optimal audio and video playback.

The signal paths are as short as possible to keep degradation to a minimum. Vibration-Resistant for Greater Sound Quality Vibration-resistant construction suppresses the negative influence of vibration on sound quality. Power transformers are securely mounted on the receiver’s solid bottom chassis to minimize vibration.

Connecting to an amplifier or AV receiver

This seems contrary to what is supposed to happen. Not sure what the problem is? You got rid of the buzz. Go make some music! You have to use a direct box to attenuate the signal.

Nov 30,  · How to hook up Emotiva (NEW) Emotiva Forums – v About The Forum Updates. How exactly would I go about hooking up my receiver to the xpa-5? I have a pioneer sc but have never really looked into it. The advantage of this second arrangement is to distribute the power handling between the amp and receiver, but it is not strictly.

The sound mode that can be selected varies according to the speaker configuration. The following pages provide basic connection examples. Standard configuration and connection This serves as a basic 5. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode. When you connect speakers for 10 or more channels, the output speakers automatically switch according to the input signal and sound mode.

You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF power returned without being output from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality. The speakers used exclusively for multi-channel playback and the speakers used exclusively for 2-channel playback are automatically switched for playback in accordance with the sound mode.

Dolby Atmos This speaker configuration is optimized for Dolby Atmos playback. Connecting an external power amplifier You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors.

How to Bi-Wire and Bi-Amp Your Speakers

Next If your subwoofer doesn’t have an internal amplifier , you’ll definitely want to connect an amplifier to it. To do this, you’ll need your subwoofer, an amplifier, at least one set of RCA cables these are the red, white, and yellow jacks on a single cable , speakers , and speaker wires. First, you’ll want to think about where you’ll keep the subwoofer.

Because the subwoofer is working mostly on the bass the low tones , it doesn’t require as much directional pushing as speakers do. Since you’ll have to run cables and wires between the subwoofer and other devices, you might want to keep it just a few feet from your screen. To get started with the actual hook-up, you’ll connect the subwoofer to the amplifier using the RCA cable.

Aug 12,  · Connect the amp to the receiver. The amplifier should remain connected to the receiver with an RCA cable between the amplifier outputs and the amp inputs on the receiver. This effectively creates a loop from the receiver through the equalizer and amplifier and back to the : K.

In some ways, thick, high-end wire can present MORE of a problem than the conventional skinnier stuff. More on that later. For the purposes of discussion we will use the term “amp” short for amplifier to refer to any receiver, integrated amp or power amp. This sheet is intended for solid state, transistorized sets. We’ll leave tubes out of this particular discussion. It is absolutely crucial that you use extra care in hooking up any solid state transistorized amp.

Connecting a connect-amp to a receiver

How do you hook-up or wire up one light with two on-off switches? For information on how to hook-up one light with two on-off switches, see the Related link “How to wire 3-way and 4-way switches, including wiring diagrams”, shown below. When using the correct size wire, there are severa…l possible configurations of power connection, lighting outlet, and the two 3-way switches.

May 20,  · If you just connect speakers by twisting all the plus wires together and connect them to plus and do the same thing for minus, you could end up with a blown amplifier .

Double your home theater receiver’s power Today’s receivers are jam-packed with features, the one thing they lack is power. Emotiva Audio’s XPA power amplifier can boost your home theater’s sound. Emotiva Audio Today’s receivers are jam-packed with features, but the one thing they lack is power. Some can barely manage a third of their claimed wattage. Right now, your watt per channel receiver might be pumping out only 30 something watts.

People ask me about this stuff all the time–“Steve, Denon, Onkyo, Pioneer, Sony and Yamaha receivers all boast up to the nanosecond surround processing modes, connectivity options up the whazoo, and fancy shamncy remotes–so what exactly would a brawny multichannel amplifier get me? Separate power amplifiers have room for all of that good stuff. It’s actually a lot more powerful than just double your average watt per channel receiver; the XPA amplifier can deliver up to watts to each of its five channels with four-ohm speaker loads.

You’ll look far and wide to find a receiver that can drive low-impedance speakers like a separate power amp can. And it’ll cost a whole lot more than the Emotiva XPA will. Oh, and please don’t worry that the XPA is too powerful for your speakers. Too much power doesn’t harm speakers, playing them too loud with an underpowered receiver is far more likely to do your speakers in.

SAE 5000 how to hook up to receiver

Is your amp bridgeable and how many channels does it have? I have a watt 4 channel crunch amp. The good thing about 4 channel is you can have a pair of sub-woofers bridged to channels 1 and 2 and control your bass.

Using a subwoofer with a stereo receiver (no sub output)? I actually tried this way of hooking up my sub today and I had an issue with volume. That’ll quiet the sub, along with everything else. Then just use the integrated amp’s volume pot to turn the speakers back up. Unless you’re running out of power on the amp and can’t make the.

Share on Facebook Graphic equalizers became popular in home audio applications in the late s and throughout the s. They can be easily recognized by their series of slide controls that divide the frequency generally from 20 Hz to 20 kHz, the approximate range of human hearing. The slide controls are centered at zero and slide up and down from zero to 3 db. Hooking up a graphic equalizer to a stereo receiver is a relatively straightforward and simple process. Graphic equalizers allow you to fine-tune your audio experience.

The units came from the factory with easily removable RCA connectors in place. To hook up a graphic equalizer to such a unit, remove the plugs and connect one pair of audio cables to the pre-amp output and the other end into the left and right channel inputs on the rear panel of the graphic equalizer. Plug a second pair of audio cables from the left and right channel inputs of the amp to the output channels on the back of the graphic equalizer.

Turn on both units and adjust the equalizer slide controls to your preferences. Incompatible Stereo Receivers Stereo receivers that do not have pre-amp to amp connections can be hooked up to a graphic equalizer as long as they have an unused tape monitor connection. Plug a pair of RCA audio cables into the input sockets on the rear of the graphic equalizer.


To try to get this working, I recently purchased a secondary amp with RCA inputs to power the extra speakers. The additional speakers 5 pairs are mounted in the ceilings throughout the house. I also have a speaker selector box so that I can select which room or rooms I want to send the sound to. The output can be mono. I just want some sound to the other rooms. Any ideas short of buying a new amp with a 2nd zone output?

How to hook up amp to receiver, frequently bought together. The Distortion channel and a Preamp channel. If you used a G String and put just the Decimator block after the delay it will cut off the repeats as soon as you stop playing since the level detector would be reading the direct guitar signal.

Originally Posted by Trogdor Thanks dd3mon. Okay, how will imaging be effected by a sub in the corner? Has anyone done this with with 2 sub’s on placed in both front corners? I’m considering getting an external sub for my 2 channel setup. My speakers do bass quite nicely tight and accurate but not booming though I’m about to change amplification drastically.

Many sub manufacturers especially the cylindrical models such as SVS’s most popular line recommend corner placement. Imaging should be not be affected unless your mains are extremely bass-light so the sub’s crossover has to be set very high. True low-bass somewhere around hz and below becomes very difficult to accurately locate the source of it. This means if your sub is only handling the lower frequencies, placement will just affect it’s output level and possible room resonances, not imaging.

Of course, two subs one in each front corner is the optimal setup; However not all of us can afford these luxuries, and not all of us have rooms large enough to not be overwhelmed by the output of two subs -dd3mon Amp:

hooking up separate amp

If so, can you let me know how? Are there any risks? It is time for me to summarize my most important conclusions at the amptone site. First you should read http: I’ve been re-reading wonderful books about recording the guitar and getting guitar sounds.

Connecting a Turntable to Your Computer receiver or amplifier as a “Phono” input) must supply a precise amount of bass boost and treble cut. Radio Shack). Use audio cables to connect the turntable to the adaptor’s input and cables to connect the output of the adaptor into your receiver .

Yamaha RX-A Home theater enthusiasts are well aware of the limitless possibilities when possessing a high-end home theater receiver. The more budget conscious consumers are understandably not and will likely settle with home theater receivers that cost less than half the price of these high-ends. High price also means powerful internals including watts of power to play with 10 HDMI ports 8 in and 2 out.

Below is the back panel layout. Click on image to enlarge for a clearer view. The primary theme of MusicCast is wireless streaming and that means the grand vision of having a wireless speaker in every room of the house so you can hear the same track playing anywhere in the house. People are already living that dream thanks to the several multi-room wireless audio solutions readily available today.

One of the limitations of having a traditional multi-room wireless audio system is that you are only limited to streaming local and online music. Since the main hub of the wireless experience is the receiver itself, MusicCast provides the added potential in streaming any audio coming from any source hooked up to the Yamaha RX-A

Tutorial: AV Receiver & Amplifier Set up